Freight class calculator
Enter each pallet or crate as it ships, pallet included. The calculator works out the density in pounds per cubic foot and the class it falls in on the 13-tier NMFC scale used since 19 July 2025.
100 estimated freight class
- Density
- 9.38 lb/ft³
- In metric
- 150 kg/m³
- Total cube
- 53.33 ft³
- Total weight
- 500 lb
Band 6 of 13: 8 to under 10 lb/ft³.
Class 92.5 starts at 10 lb/ft³. This pallet reaches it at 45 in tall, or with 33 lb more on it. A lower class usually means a lower rate per pound.
An estimate for freight without special handling, stowability or liability concerns. Some NMFC items keep a fixed class, so confirm the class with your carrier before you book.
Freight class density chart
The 13-tier NMFC density scale, in effect since 19 July 2025. Each band includes its lower limit and stops just below its upper limit, so exactly 10 lb/ft³ is class 92.5.
| Band | Density, lb/ft³ | Density, kg/m³ | Freight classClass |
|---|---|---|---|
| 1 | Less than 1 | Less than 16 | 400 |
| 2 | 1 to under 2 | 16 to under 32 | 300 |
| 3 | 2 to under 4 | 32 to under 64 | 250 |
| 4 | 4 to under 6 | 64 to under 96 | 175 |
| 5 | 6 to under 8 | 96 to under 128 | 125 |
| 6 | 8 to under 10 | 128 to under 160 | 100 |
| 7 | 10 to under 12 | 160 to under 192 | 92.5 |
| 8 | 12 to under 15 | 192 to under 240 | 85 |
| 9 | 15 to under 22.5 | 240 to under 360 | 70 |
| 10 | 22.5 to under 30 | 360 to under 481 | 65 |
| 11 | 30 to under 35 | 481 to under 561 | 60 |
| 12 | 35 to under 50 | 561 to under 801 | 55 |
| 13 | 50 or more | 801 or more | 50 |
How to calculate freight class
Measure the loaded pallet at its longest, widest and tallest points, pallet included. Multiply length, width and height in inches and divide by 1,728 to get cubic feet. Divide the total weight, pallet and wrap included, by the cubic feet. That density in pounds per cubic foot sets the class. A 48 by 40 by 48 inch pallet weighing 500 lb is 53.33 cubic feet and 9.38 lb per cubic foot, which is class 100.
What changed in July 2025
NMFTA Docket 2025-1 moved about 2,000 commodity listings to density-based classes and replaced the 11-band density scale with 13 bands. The two new bands, class 55 from 35 lb per cubic foot and class 50 from 50, give very dense freight a lower class than the old floor of class 60.
Lower the class with a better pallet
Density rises when the same weight takes less space. A shorter, fuller pallet, a carton that fills the deck, or one pallet instead of two half-empty ones can move a shipment into a lower class. Plan the layer and the height in the pallet calculator, then check the class here.
Questions
How do I calculate freight class?
Multiply the loaded pallet's length, width and height in inches and divide by 1,728 to get cubic feet. Divide the total weight, pallet included, by the cubic feet. Match that density in pounds per cubic foot to the NMFC density scale.
What freight class is a 48 x 40 x 48 pallet at 500 lb?
53.33 cubic feet and 9.38 lb per cubic foot, which is class 100 on the 13-tier scale. At 533 lb or more it reaches 10 lb per cubic foot and class 92.5.
What changed in the NMFC in July 2025?
Docket 2025-1 took effect on 19 July 2025. About 2,000 commodity listings moved to density-based classes, and the density scale grew from 11 bands to 13, adding class 55 from 35 lb per cubic foot and class 50 from 50.
Do I include the pallet in freight class?
Yes. Measure and weigh the loaded handling unit: the pallet, the freight, wrap and straps.
Is the calculated freight class final?
It is an estimate for freight without special handling, stowability or liability concerns. Some NMFC items keep a fixed class, so confirm with your carrier.