Linear feet calculator

Linear feet is how much trailer floor your freight takes, measured down the length of the trailer. Enter the pallets to see the footage, how much of the trailer that is, and whether it is likely to trip a carrier's linear foot rule.

Pallets, inches and pounds
Stacking

20 ft linear feet

Trailer used
38% of 53 ft
Rows
5 of 2 across
Cube
556 ft³
Density
16.2 lb/ft³
20 ft53 ft

At 20 ft this is past the 10 to 12 ft where many LTL carriers apply a linear foot rule. Ask for a volume LTL or partial truckload quote.

Turned with the 40 in side down the trailer, the load takes 16.7 ft and a full trailer holds 30. Check the trailer's inside width before you plan on it.

A full 53 ft dry van holds 26 of these pallets loaded 2 across. Inside width is taken as 100 in.

How to calculate linear feet

Standard 48 by 40 inch pallets load two across a dry van with the 48 inch side running down the trailer. Divide the number of pallets by two, round up, multiply by the pallet length in inches and divide by 12. Ten pallets make five rows of 48 inches, which is 240 inches or 20 linear feet. An odd pallet still takes a full row.

The linear foot rule

LTL rates assume freight shares the trailer. When a shipment takes a long run of floor, carriers charge for the space instead. Most apply the rule somewhere between 10 and 16 feet, with 12 feet the figure seen most often. Check your carrier's tariff for its exact threshold and charge.

Use less floor

Stackable pallets halve the footage. Building each pallet to a full, even height means fewer pallets for the same goods. Plan the carton layout in the pallet calculator, then check the trailer with the truck loading calculator.

Questions

How do I calculate linear feet for pallets?

Divide the number of pallets by two, round up, multiply by the pallet length in inches and divide by 12. Ten 48 by 40 inch pallets loaded two across take 20 linear feet.

How many linear feet is a standard pallet?

A 48 by 40 inch pallet takes 4 feet of trailer length. Two fit side by side, so each pair uses 4 linear feet.

What is the linear foot rule?

LTL carriers charge for trailer space instead of weight when a shipment takes a long run of floor. The threshold is usually between 10 and 16 feet, most often 12 feet.

How many pallets fit on a 53 foot trailer?

26 standard 48 by 40 inch pallets on the floor, loaded two across with the 48 inch side down the trailer. Turned, with the 40 inch side down the trailer, up to 30 can fit if the inside width allows.

Does stacking pallets reduce linear feet?

Yes. Pallets stacked two high take half the floor, so ten stackable pallets need 10 linear feet instead of 20.

Need this built into your operation?

  • Custom warehouse software
  • Pallet optimization software
  • Logistics automation
  • Supply chain platform
Book Consultation